Door Controller
Electronic door lock that opens/closes doors based on power state.
Overview
The Door Controller is an electronic lock that opens or closes a nearby door based on its power state. When it receives power, the paired door opens. When power is cut, the door closes. Wire it to switches, pressure pads, or sensors to create automated entry systems.
Specifications
| Property | Value |
|---|---|
| Type | Consumer |
| Power Consumption | 5 u/s |
| Ports | 1 in / 0 out |
| Pairing Radius | 1.0 m |
| Max Paired Doors | 5 |
| Supported Door Types | Fence gates, Building doors |
| Weight Kit | 500 g |
| Class Name | LFPG_DoorController |
How It Works
- Powered ON: Opens the paired door (if currently closed)
- Powered OFF: Closes the paired door (if currently open)
- Auto-pairing: Automatically pairs to the nearest fence gate or building door within 1.0 m radius
The controller supports up to 5 door indices, meaning it can work with multi-door buildings. Place it within 1 meter of the door you want to control.
LED Indicator
- Green: Powered — door is open
- Red: Not powered — door is closed/locked
- Off: Not connected to the grid
Wiring Examples
Buzzer Entry
The V1 switch sends a 2-second pulse, opening the door briefly then auto-closing.
Automatic Entry
Door opens when someone steps on the pad, closes when they step off.
Security Gate (two-factor)
Requires both the remote switch AND detected motion to open — prevents accidental entry.
Airlock System
Only one door opens at a time — classic airlock behavior.
Tips
- At only 5 u/s, door controllers are very efficient. A single solar panel can run four of them.
- Place within 1 meter of the door or gate — it auto-pairs to the nearest compatible door.
- Combine with Switch V1 for timed access (door opens for 2 seconds then auto-closes).
- For permanent open/close control, use Switch V2 instead of V1.
Descripción General
El Controlador de Puerta es una cerradura electrónica que abre o cierra una puerta cercana basándose en su estado de energía. Cuando recibe energía, la puerta emparejada se abre. Cuando se corta la energía, la puerta se cierra. Conéctalo a interruptores, plataformas de presión o sensores para crear sistemas de entrada automatizados.
Especificaciones
| Propiedad | Valor |
|---|---|
| Tipo | Consumidor |
| Consumo de Energía | 5 u/s |
| Puertos | 1 entrada / 0 salida |
| Radio de Emparejamiento | 1.0 m |
| Máximo de Puertas Emparejadas | 5 |
| Tipos de Puerta Soportados | Puertas de cerca, Puertas de edificio |
| Peso del Kit | 500 g |
| Nombre de Clase | LFPG_DoorController |
Cómo Funciona
- Energizado ENCENDIDO: Abre la puerta emparejada (si está cerrada actualmente)
- Energizado APAGADO: Cierra la puerta emparejada (si está abierta actualmente)
- Emparejamiento automático: Se empareja automáticamente con la puerta de cerca o edificio más cercana dentro de un radio de 1.0 m
El controlador soporta hasta 5 índices de puerta, lo que significa que puede funcionar con edificios de múltiples puertas. Colócalo a menos de 1 metro de la puerta que deseas controlar.
Indicador LED
- Verde: Energizado — puerta abierta
- Rojo: Sin energía — puerta cerrada/bloqueada
- Apagado: No conectado a la red
Ejemplos de Cableado
Entrada por Timbre
El interruptor V1 envía un pulso de 2 segundos, abriendo la puerta brevemente y luego cerrándose automáticamente.
Entrada Automática
La puerta se abre cuando alguien pisa la plataforma, se cierra cuando se baja.
Puerta de Seguridad (dos factores)
Requiere tanto el interruptor remoto COMO movimiento detectado para abrir — previene entrada accidental.
Sistema de Escluse
Solo se abre una puerta a la vez — comportamiento clásico de escluse.
Consejos
- Con solo 5 u/s, los controladores de puerta son muy eficientes. Un solo panel solar puede ejecutar cuatro.
- Coloca dentro de 1 metro de la puerta o puerta — se empareja automáticamente con la puerta compatible más cercana.
- Combina con Interruptor V1 para acceso temporizado (puerta se abre durante 2 segundos y luego se cierra automáticamente).
- Para control permanente de apertura/cierre, usa Interruptor V2 en lugar de V1.
Обзор
Контроллер двери - это электронный замок, который открывает или закрывает соседнюю дверь в зависимости от состояния питания. Когда он получает питание, спаренная дверь открывается. Когда питание отключено, дверь закрывается. Подключи его к выключателям, чувствительным площадкам или датчикам для создания автоматизированных систем входа.
Характеристики
| Свойство | Значение |
|---|---|
| Тип | Потребитель |
| Потребление Энергии | 5 u/s |
| Порты | 1 вход / 0 выходов |
| Радиус Сопряжения | 1.0 м |
| Максимум Спаренных Дверей | 5 |
| Поддерживаемые Типы Дверей | Ворота ограды, Двери зданий |
| Вес Набора | 500 г |
| Название Класса | LFPG_DoorController |
Как Это Работает
- Питание ВКЛЮЧЕНО: Открывает спаренную дверь (если она в настоящее время закрыта)
- Питание ОТКЛЮЧЕНО: Закрывает спаренную дверь (если она в настоящее время открыта)
- Автоматическое сопряжение: Автоматически сопрягается с ближайшими воротами ограды или дверью здания в радиусе 1.0 м
Контроллер поддерживает до 5 индексов дверей, что означает, что он может работать со зданиями с несколькими дверями. Разместите его в пределах 1 метра от двери, которую вы хотите контролировать.
Индикатор LED
- Зеленый: Питание включено — дверь открыта
- Красный: Питание отключено — дверь закрыта/заблокирована
- Выключено: Не подключено к сети
Примеры Проводки
Вход через Зуммер
Выключатель V1 отправляет импульс на 2 секунды, открывая дверь ненадолго, затем закрываясь автоматически.
Автоматический Вход
Дверь открывается, когда кто-то наступает на площадку, закрывается, когда уходят.
Защитные Ворота (двухфакторные)
Требует И дистанционного выключателя И обнаруженного движения для открытия — предотвращает случайный вход.
Система Шлюза
Только одна дверь открывается одновременно — классическое поведение шлюза.
Советы
- Всего при 5 u/s контроллеры дверей очень эффективны. Одна солнечная панель может запустить четыре.
- Размести в пределах 1 метра от двери или ворот — автоматически сопрягается с ближайшей совместимой дверью.
- Комбинируй с Выключателем V1 для временного доступа (дверь открывается на 2 секунды, затем автоматически закрывается).
- Для постоянного управления открыванием/закрыванием используй Выключатель V2 вместо V1.